Category: Mod
-
Elegoo Mars 3: 03 Refreshing Air Quality (Carbon Filter Mod)
The new Pro printer comes with carbon activated filters that can remove some (all?) of the resin smell. While some people think that these filters are useless. It wouldn’t be called Pro if we wouldn’t at least try to replicate the same feature in our base model. Luckily for us, the process is half done…
-
Elegoo Mars 3: 02 8% shy of perfection (Fresnel Lens mod)
Okay, the previous update wasn’t so much about being “pro”, after all the new Mars 3 Pro has the same fan… But!! you will feel this way was how this printer should have been from the start. Back to being on topic. Next in the list is the so-called Fresnel lens that it’s supposed to…
-
Elegoo Mars 3: 01 Fan Service
One of the biggest annoyances of this printer is that the UV LED array cooling fan runs 100% of the time. Even when there isn’t anything being printed on. It wouldn’t bother me so much if the fan wasn’t so loud. Which at full speed, distracts from the printer’s elegant operation. Thankfully there is an…
-
Transmission Cooler + ATF Flush (Part 2)
(this post is part of a series, for part 1 go here. ) Last time, we were working on getting the tranny cooler installed, we were able to choose a place where to put it, next step would be to actually connect it in series with the ATX (Automatic Transmission) and exchange the ATF (Automatic Transmission Fluid) with…
-
Transmission Cooler + ATF Flush (Part 1)
(this post is part of a series, for part 2 go here. ) Problem Automatic transmissions are extremely vulnerable to heat. The additional size and number of moving parts creates more heat, which requires additional fluid capacity, and cooling. The Mazda 6 ATX (Automatic Transmission) takes 8.77 qts or 8.3 liters.
-
Brake Mod
So looking around in the interballs, I came across a forum post detailing a mod that is commonly done to the US version Mazda 6 2000-2007 to make the tail lights turn on when the brakes are applied, as they normally only work when the parking lights are on. I realized then that my car…
-
HP MediaSmart Server Rebirth
A friend of mine had an old HP MediaSmart Server. but it apparently had a bad power supply (the server didn’t boot when plugged into the wall), I asked for it and after some begging, he acceded to give it to me to see if I could do something with it. This signaled the start…
-
In-Car Tablet Install (Part 1)
Today, the newest cars in the market ship with their own touch screen where you can visualize radio, navigation, etc. At the time, my car didn’t come with any of that. So, I set out in a quest of adding a screen to it, but not just any screen, I wanted a tablet, and the…
-
Cruise Control Mod (Mazda 6 2006)
It appears that cruise control is a standard feature in many cars right off the assembly line. Unfortunately, my car was an exception. Undeterred, I embarked on a quest to install it myself.